Kabolite Scania 770S 6X6 caught the attention of many 1/14 RC tractor truck fans. The new Kabolite Scania 770S 100 4X2 RTR keeps that officially licensed Scania 770S presence, but puts it into a shorter, cleaner two-axle chassis.
It is a 1/14 scale RTR model built with metal, plastic, and rubber parts. Key metal components include the chassis beams, cross beams, air tanks, drive shaft, axle gears, transmission gears, suspension, steps, fifth wheel, cab latch, and connecting rods. The truck comes factory painted and fully assembled, and is currently available from Kabolite Scania 770s 100 RC Tractor Truck 4X2 RTR for $649 in red or grey.
Video Demonstration
A video demonstration of the Kabolite Scania 770S 100 RC Tractor Truck is available here:
Initial Impressions: A Clean Two-Axle Scania Tractor
The first thing you notice is the short chassis and clean two-axle proportion. The officially licensed Scania 770S cab, wide front end, roof light set, side 770 graphics, and rear fifth wheel still give it the look and presence of a 1/14 European tractor truck.
The red version has a stronger visual punch, while the grey version feels more understated. With the short rear frame, the truck’s visual weight stays around the cab and fifth wheel area. Once you pair it with a 1/14 semi-trailer, the overall stance looks closer to a real road tractor.
Build Quality: Metal Parts in the Working Areas
With an RC tractor truck, the body shell is only one part of the experience. The chassis, drivetrain, and trailer connection matter just as much once you actually start driving and towing. This model uses metal chassis beams, cross beams, drive shaft, axle gears, transmission gears, suspension, and fifth wheel, so it feels more solid when pulling a trailer.
At about 4.2 kg, it has enough weight in hand to feel serious. It does not look thin or hollow when parked on a desk, in a garage, or inside a scale RC scene. The shorter chassis also makes it easier to move around, display, and turn in tighter spaces.
Battery and Setup Tips
The truck comes as an RTR package with the motor, servo, ESC, radio receiver system, vehicle battery, charger, and manual included. You only need to prepare four AA batteries for the transmitter.
Runtime is about 15–20 minutes, and a full charge takes around 3–5 hours. For the first run, it makes sense to drive the truck without a trailer first. Check the steering, throttle, lights, sounds, and gear shift, then hook up a trailer and test the fifth wheel angle and reversing feel.
Control Dynamics: Two-Speed Transmission and Differential Lock
The two-speed transmission makes the truck more enjoyable to drive. Low gear is slow enough for trailer coupling, reversing, tight turns, and scale-style driving. High gear gives it more pace when you want to cruise across a flat floor, driveway, or garage space.
The rear axle also has a differential lock, which helps when the truck starts with a trailer or rolls over slightly uneven ground. In a short straight run, it can stay within about 20 cm of the line, and the turning circle is about 2.2 meters. The remote range is around 30–50 meters in an open area, which is plenty for normal RC trucking use.
Scale Details: Cab, Lights, Sound, and Fifth Wheel
The cab uses an officially licensed 770S design, and the magnetic doors can be opened. The metallic paint, side steps, wheels, rear fenders, and short rear frame give the truck a finished scale-model look instead of just feeling like a simple body shell.
The lighting setup includes headlights, front lights, lower bumper lights, turn signals, hazard lights, side marker lights, brake lights, reverse lights, and roof spotlights. The sound system includes horn, engine sound, reverse sound, and hazard warning sound.
The fifth wheel can move left and right, as well as up and down, which helps the tractor and trailer sit together more naturally. With a flatbed trailer, box trailer, or low-bed trailer attached, the whole setup feels much more like a proper RC trucking scene.
Towing Performance and Use Cases
The truck can tow up to 15 kg, so it can work with many 1/14 RC semi-trailers. It can be used as a regular semi-truck tractor, or added to an RC construction setup with excavators, loaders, forklifts, and other scale machines.
Because the chassis is shorter, it does not need a huge space to turn around. It works well for road-style hauling, indoor display, garage driving, trailer coupling practice, and short video clips.
Conclusion: A Strong New Choice for 1/14 RC Truck Fans
The Kabolite Scania 770S 100 4X2 RTR keeps the officially licensed Scania 770S look, 1/14 scale body, metal chassis structure, two-speed transmission, rear differential lock, lights and sound, magnetic opening doors, fifth wheel towing setup, and 15 kg maximum towing capacity.
If you like the big tractor-truck presence of the Kabolite Scania 770S but want something lighter, cleaner, and better suited to road-style trailer hauling, the Kabolite Scania 770S 100 4X2 RTR is a 6X6 RC tractor truck alternative worth considering.